Shop By Category

Shop By Brand

Email Signup
Tire Rack- Revolutionizing Tire Buying




Home > Steering
Choose a sub category:
Cherokee XJ (1984-2001) Grand Cherokee ZJ (1993-1998)
Wrangler JK (2007-Present) Wrangler TJ (1997-2006)
Wrangler YJ (1987-1995)
Sort By:
Page of 2
Synergy Suspension GM 1 Ton TRE Adapter
Our Price: 10.00

* Synergy Suspension Steering Correction Kit (PPM-8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance and to correct steering geometry on lifted Jeep JKs
  * Adapter is designed to flip the taper on the steering knuckle
  * Eliminates the need for reaming the knuckle to the correct taper. Drill the existing taper with a 7/8" drill bit for installation
  * CNC machined from 303 stainless steel
  * Sold Individually
Synergy Suspension Heavy Duty Metal-on-Metal Tie Rod End
Our Price: 30.00

* Synergy Suspension Heavy Duty Metal-on-Metal Tie Rod End
  * Fully greasable sintered metal on metal bushing design has high wear resistance
  * Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
  * Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
  * Outperforms the factory and all other aftermarket style tie rod ends by offering:
  * A larger shank with no stress riser (doesn't neck down at base), Elimination of the nylon ball race
  * Tie Rod end boot is made from tear/wear resistant material made from silicone & polyurethane
  * Includes all necessary hardware for installation
  * 7/8-18 UNF LH or RH Thread available
  * Designed specifically to be used in the following Synergy Suspension products:
    PPM-8451, PPM-8452, PPM-8001, PPM-8002
Synergy Jeep JK HD Weld-On Front Track Bar Bracket, 2.5" Axle Tube
Our Price: 125.00

Bomb Proof Adjustable Front Track Bar
Our Price: 149.00

The rigidity of the of your front track bar as never been so critical for a Jeep application as it is for the all new Wrangler JK model. Your front track bar plays a major role in the ESP function so for safe operation of your Wrangler JK you better have a good one! Our Bomb Proof front track bar is double adjustable to allow for precise centering of the front axle and is made from 1 1/2 inch diameter solid alloy steel. The Rock Krawler bomb proof front track bar comes with our exclusive abuse proof lifetime warranty.
Bomb Proof Adjustable Rear Track Bar
Our Price: 179.00

The Rock Krawler bomb proof double adjustable rear track bar is the strongest rear track bar offered in the industry. It is made from 1.5" solid alloy steel! There is an adjustable spherical joint with bushing at the frame connection for vibration isolation and an adjustable spherical joint at the axle for the ultimate in off-road ability! The Rock Krawler adjustable rear track bar requires a rear track bar relocation bracket at the axle and uses the stock mounting position at the frame!
Synergy JK Front Track Bar & Sector Shaft Brace Kit
Our Price: 200.00

Synergy Hi-Mount Stabilizer Relocation Kit w/ Synergy Steering Stabilizer
Our Price: 220.00

Synergy Hi-Mount Stabilizer Relocation Kit
  • PPM-8007 - Jeep JK Fox/Synergy Steering Stabilizer Mount
  • PPM-8003 - Jeep JK Steering Stabilizer Tie Rod Clamp
  • Note: 2011+ Jeeps will require the use of the PPM-8003 Tie Rod Clamp. The factory clamp cannot be flipped, it will interfere with the differential cover
  • Available in Right Hand Drive (RHD)

Heavy Duty Drag Link
Our Price: 249.00

The Rock Krawler heavy duty Drag Link for the Wrangler JK is simply the strongest drag link on the market! This bad boy is made from 1 1/2 inch diameter solid alloy treated steel and is machined to accept 1" shank Tie Rod Ends from the OEM JK Pitman Arm Connection. The Rock Krawler drag link is a plug and play upgrade with no drilling or having to change the taper of the factory knuckles. The drag link assembly has a quick adjuster for precise centering of the steeing wheel which is crutial for ESP compatibility!
Synergy Suspension YJ Heavy Duty Tie Rod
Our Price: 250.00

* Heavy duty tie rod for Jeep YJ Vehicles
* Made from 1 3/8" 4130 Chromoly and Heat Treated for maximum strength - 2x (200%) stronger than stock tie rod
* Feature LH and RH opposing threads to allow adjustment of tie rod length without removal from vehicle
* Strongest Jeep Tie Rod on the market!
* Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
* Features 1-Ton GM Tie Rod ends for maximum strength
Heavy Duty PRO Tie Rod
Our Price: 279.00

The Rock Krawler Heavy Duty PRO Tie Rod for the Wrangler JK is simply the best tie rod on the market! This bad boy is made from 1 5/8 inch diameter solid 7075 memory filled, high grade, aluminum alloy. It used use OEM JK Tie Rod Ends from the drag link connection at the pitman arm. These TRE's are 1 inch shank units and are much stronger than the OEM JK tie rod ends on the factory tie rod. The Rock Krawler HD PRO Tie Rod is a plug and play unit with no drilling or having to change the taper of the factory knuckles.